CGDI MLB 2026 Programmer Supports MLB MQB48 Key Reading and Adding

Description

CGDI MLB Programmer Supports MLB MQB48

CG MLB Tool Functions:
1. Supports MLB key reading and key adding for Porsche /Bentley / Audi / Volkswagen / Lamborghini
2. Supports MQB48 key reading and key adding for Volkswagen /Audi / Skoda
3. Supports remote generation for MLB Evo models (Porsche /Bentley / Audi / Volkswagen / Lamborghini)
4. Supports OBD learning
5. Supports modifying key ID

CG-MLB Programmer Features:

1. Dual-Platform Coverage: Full support for reading key data and adding keys on premium MLB Evo and mainstream MQB48 vehicle networks.
2. Synchronized Remote Generation: Generates dealer keys and programs remote control functions simultaneously for luxury MLB Evo models.
3. On-Board Diagnostics (OBD) Learning: Completes the final, crucial key-matching phase directly via the vehicle’s OBD port.
4. Flexible Solder-Free Setup: Supports rapid data reading. While standard operation allows for soldering wires, using a non-disassembly adapter allows technicians to simply place the key PCB onto the adapter without soldering.
5. No Annual Fee: Free to use with one free calculation per day included. Additional daily calculations can be unlocked using CG key points.
6. Hardware Friendly: Operates smoothly via a direct laptop/computer connection or alongside the CGDI K2 device.

CGDI MLB Tool Software Update Log:

V1.4.2.0
Add MQB48 function
1.Add OBD function
Add OBD function to read vehicle information (original key ID).

2.Key points acquisition
Add V-Engineer key points acquisition.

3. Optimized solutions
Optimized solutions for learning/collection failures in certain cases.

FAQ CGDI MLB Tool:

1. What key need to work with, and is it picky about keys?
Answer: Original factory keys or aftermarket keys that use the original factory protocol. CGDI will also release MQB/MLB keys.

2. Does it support other manufacturers’ transponder keys?
Answer: It supports keys from other manufacturers that use the original factory protocol. Keys that do not use the original factory protocol are not supported.

3. Is it only for add key, and does it require soldering to read the original vehicle key?
Answer: It’s for add key. If you don’t have a solder-free adapter, you will need to solder wires. With a solder-free adapter, you just remove the key circuit board and place it on the adapter.

4. Can this complete key data reading and programming as a standalone device?
Answer: It requires server-side calculation and an internet connection.

5. Are there any prerequisites for reading data, such as needing credits or a dedicated transponder key?
Answer: One free calculation per day. It also supports free calculations using CGDI universal key credits.

6. Is there an annual fee?
Answer: No.

7. Can this be connected to a laptop?
Answer: It can be connected to a computer or used together with the K2.

8. Supported vehicle models and key types?
Answer: Currently supports MLB and MQB48.

9. Does it support “all keys lost” (MLB/MQB48)?
Answer: The original vehicle key is required, and it must be able to perform emergency start (even if the remote control portion is damaged or the smart function is damaged).

10. If the vehicle owner does not have the original factory key, but only a previously added CG transponder key that can start the vehicle normally, can that CG key be used directly to read the data for adding an MQB48 key?
Answer: Yes.

CGDI MLB Tool MLB Key Wiring Diagrams







Package List:

1pc x CGDI CG-MLB Programmer Host
1pc x DB25 Programming Cable
1pc x DB25 OBD Cable
1pc x USB Cable